21
Assembling the Wonderseat
Shoulder Harness
Installing Lower Straps in Back Support
Feed the straps through plastic
Triglide as shown in steps 2 and 3
Hip Guide section.
Repeat for other side
Pull up the Back Support flap and remove Bingo-OT shoulder harness clip
thumb nut (
A
) and remove the buckle (
B
). Move the screw
(C)
from the
outer to the inner backrest hole and place through the lowest webbing hole
of the quick release buckle short strap
(D)
. Tighten on the thumb nut so it
is fully tight.
Feed the long straps buckle through the fabric Back Support guide
(E)
and
click into place. Repeat for the other side.
Insert the end of the lower strap through the lower backrest slot.
Installing Upper Straps
A
B
A
D
C
E
Summary of Contents for Spex Wonderseat
Page 2: ......
