manualshive.com logo in svg

Medicus AGM-513S, User Manual

Share
Download
Medicus AGM-513S User Manual Download Page 40

Data Transfer

33

LinkDr. 2.0 PC requirements
- CPU : Pentium4 2.4GHz or higher
- Memory : 256 MB or higher 
- HDD : 500 MB or higher
- OS : Windows XP or higher

Visit www.allmedicus.com and download LinkDr. 2.0. And set up LinkDr. 2.0 in your PC.

Run LinkDr. 2.0.

Connect the meter with your PC using Micro USB cable.

If the meter is connected with PC, “USb” appears on meter display. 

Select Date Range and click “Yes”.

Meter data will be transferred to your PC. 

After the download is completed, you can see the summary report and the meter turns o

ff

. 

Until the download is completed, do not disconnect the meter with PC and do 
not turn o

ff

 the meter. 

GlucoDr.S is designed to connect with PC using Micro USB cable and to transfer test results 

to PC. Through diabetes management software LinkDr. 2.0, you can review your test results 

and print the report.

To learn more about LinkDr. 2.0, please contact your distributor.

How to Use LinkDr. 2.0

Summary of Contents for AGM-513S






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands