QUICKSTART GUIDE
All products, controllers, specifications and data, and a set of items packaged in a box are subject to change without notice to improve the devices' reliability, function, or design.
Please, check for the details of the most updated products at the
www.MediCrystal.com
website.
*ThermoGem™ stone mattresses, mats, pads, belts, wraps, pillows can
help you create a relaxing, soothing, and re-energizing environment to
maintain your wellness, balance, sound sleeping, physical strength, and
fitness and awaken the restfulness, comfort, and invigoration powers
and energies. Together with exercises and a healthy diet, ThermoGem™
products may supplement your daily activity and become an essential
part of your healthy lifestyle, improving your ability to do everyday
things and enhance your life experience. ThermoGem™ products are
not intended to diagnose, cure, treat, mitigate, or prevent any disease,
illness, or medical condition or substitute medical treatment of any kind
or affect the body's structure or function. Information here is never to be
construed as medical advice. It does not reflect or represent a product
claim. FDA has not approved or evaluated ThermoGem™ products or this
information. All products, specifications, and data are subject to change
without notice to improve the products' reliability, function, or design.
LEGAL DISCLAIMER
1
3
5
2
4
6
8
9
7
10
11
12
13
14
MediCrystal® and ThermoGem™
products for the Asian region, EU, and
the UK are ready for 220-240V power
outlets. EU product comes with CEE
7/3, CEE 7/5, or a universal earthed
CEE 7/7 plug and a permanently fitted
UK safety-approved conversion plug.
You can use a high-quality adapter
if your country’s outlet has the same
voltage but a different configuration.
Please make sure your product’s voltage is the same as your country’s
power grid. If your mat is rated for the North American 110-120V voltage
and the controller comes with a standard US NEMA 5-15P plug, use it
only in North America or Japan. If you are going to 220-240V countries,
do not use travel adapters. Use your product only with a step-down
220-250V to 110V voltage converter. The converter wattage should be
at least three times higher than the mat’s power consumption. Do not
connect the 110-120V mat into the 220-250V outlet through an adapter
and vice-versa. If you plug in a device to the wrong voltage outlet, the
product may be severely damaged and cause fire risks!
1
Power ON/OFF Toggle Button
– Push it to turn the vest ON/OFF. When you turn it ON, the display
will show ON. It means that the
controller is ON and ready to choose the program. If the controller display shows
--
, the Power is connected, but the Button has not
been activated, and no functions can be operated. Press the power button again with some effort so that display
shows
ON
.
2
POWER indicator
– Lights up when Power is ON.
3
Timer Control Toggle Button
– Select one of the 4 options shown on the display
:
1H, 4H, 8H, 0H
for 1, 4, 8, 12 hours heating
session with auto shut-off when the time expires, or you can choose
-H
(NO HEATING MODE) for only PEMF function without heating.
Press and hold for 5 seconds to turn OFF
Auto-Protection Feature
; the display
will show
S-
. Press and hold again to
reactivate this feature, and the display
will show
SA
.
4
«HEATING» Operation Indicator
– ON when the vest is heating, OFF when the set temperature is reached.
5
Temperature, Timer, Frequency, and Program Display
– Switches into Temperature Mode when the Temperature Dial
is rotated.
The display shows the current Celsius temperature (
30–70°C
), flashes to the set temperature when the dial is rotated, then back again.
If the temperature is more then 122°F (50°C) for longer than 3.5 hours,
Auto-Protection Feature
will decrease it to a safe
113°F (45°C) level, and the display will show
[ ]
.
In Timer mode
, the display shows one of the 5 heatings time settings
1H, 4H, 8H, 0H,
or
-H
chosen by the Timer Control Button
. When the heating program is over, the display will show
--
,
OF,
or
ON,
indicating that Power is ON, but the time set has
expired. Add time to resume heating or push the Power Button
to turn off the controller.
In PEMF Program mode
, the display shows one of the PEMF program settings.
P-
(PEMF OFF for FAR INFRARED heating function
only),
PO
(manual frequency adjust mode),
P1, P2, P3, P4, P5, P6, P7, P8, P9, PA, PC, PE, PF
(automatic PEMF programs).
Please, check the controller user guide for details. If Manual Frequency adjusts dial
is in active mode display shows current
PEMF frequency in Hz (
1–30
number of pulsations per second). Please, check the controller user guide for details.
In PHOTON Program mode
, the display shows one of three PHOTON program settings.
1P
= PHOTON ON 30 minutes.
2P
= PHOTON runs 8
program cycle (One cycle = PHOTON ON 30 minutes OFF 30 minutes).
-P
(PHOTON OFF for FAR INFRARED and/or PEMF functions only).
The display may also show
OF
, flickering or static
--
if the Power Button
is not pressed or the connection between the controller and
the vest is lost. Press Power Button
to turn ON all other controller functions or reconnect the controller to the vest tightly to resume.
6
Adjust Temperature Dial
– Use to increase or decrease heat 30–70°C (86–158°F). The dial range is marked, indicating the
desired temperature in °F.
7
PEMF Program Button
– Choose
P-
(PEMF off) one of 13 automatic Program options
P1, P2, P3, P4, P5, P6, P7, P8, P9, PA,
PC, PE, PF
shown on display
or switch to manual frequency adjust mode
PO
. Press and hold for 3 seconds to quickly return to
P-
(PEMF off). Please, check the controller user guide for details.
8
Adjust PEMF Frequency Dial
– Use to increase or decrease magnetic pulsation frequency from 1 to 30 times per second. You
can try different frequencies to find what works better for you.
9
Adjust PEMF Frequency Dial ON Indicator
– Lights up when PEMF manual adjust dial is ON, frequency is chosen in manual
mode, PEMF is ON, OFF when it stops.
10
PEMF ON Indicator
– Lights up when PEMF function is ON, OFF when it stops.
11
PEMF PROGRAM CYCLE Indicator
– Lights up when PEMF is auto cycled by the program, OFF when the whole program is over.
12
PHOTON Program Button
–
Choose one of three PHOTON program settings.
1P
turns ON Red Light LEDs for 30 minutes.
2P
runs an eight
cycles program (One cycle = PHOTON ON 30 minutes, OFF 30 minutes).
-P
(PHOTON OFF for FAR INFRARED and/or PEMF functions only).
13
PHOTON ON Indicator
– Lights up when the Red Light LEDs are ON, OFF when PHOTON function stops.
14
PHOTON PROGRAM CYCLE Indicator
– Lights up when Red Light is auto cycled by the program, OFF when the whole Program is over.
CONTROLLER H-60PVA
for vests with PEMF and PHOTON
1.
Consult your health professional
to make sure that you can use red light, hot stones, FIR
sauna, and PEMF (pulsed electromagnetic fields). Take extra care if you have any health
issues.
2.
Read the USER GUIDE, safety instructions, «use with caution», and contraindication
sections
to be sure that the vest is OK for you, especially if you will use it use it on high
heat settings or sleep with it.
3.
Drink a lot
of water, juices, herbal teas before, during, and after sessions, and replenish
minerals such as calcium, potassium, sodium, magnesium, and others lost with sweat or
urine.
4. Create
a relaxing surrounding atmosphere
.
5.
Put the vest on your bed or the floor
with crystals facing up
.
6.
If you have a regular connector, please connect the controller to the vest to fit snugly. If
your device comes with an in-line connector, connect it so that the male plugs go inside
the female pins. Then screw the connector so that it’s tight.
7. Turn the controller ON and set the timer, only then
set the max temperature to test the
vest for an hour
. While it is cooling down,
test PEMF functions for 15-20 minutes
. Do
not put the protector on the vest or lay on it during this time.
8.
Cover the vest ENTIRELY with a blanket to pre-heat the stones
for 30-60 minutes to
set level. If the vest is covered only PARTIALLY, it may cause different temperatures in
different parts of the vest, sensors disruption, and controller malfunction.
9.
The vest is rather flexible, but it is essential
not to apply excessive pressure to the
amethyst pad; never stand on the vest or bend it too much.
10. If the vest is too hard for you, or you sweat a lot and get wet, put on your T-shirt or pajama
under the vest. It will also cushion it and
eliminate the crystals’ pressure
. You may use a
towel instead if necessary. For more Red Light, try a plain vest for 15-30 minutes.
11.
Start with the vest on the lowest heat settings
, 35-40°C or 96-112°F, and short
sessions only for 15-20 minutes (do not forget to pre-heat the vest, it will be slightly
warm); watch how your body reacts.
12. If you
enjoy shorter sessions and your body reacts well
, move up to longer or more
intensive and frequent sessions.
13. Gradually increase the temperature by several degrees and session time
by 5 minutes
each other day
, and only if you feel comfortable and want a more intensive experience.
14. You should choose the length, intensity, and frequency of the sessions to
feel comfortable
and refreshed
. If your mat is equipped with an adjustable frequency controller, it is
suggested to start PEMF at a low frequency such as 4 Hz then increase to 8, 10, or 14 Hz.
Usually, lower frequencies have more calming effects, while higher frequencies provide
more stimulation and promote activity.
15. You should also have some rest between the sessions and
never start with more than
three a week
before you are better informed about how they influence you.
16. You can also
try the PEMF function, on the lowest heating levels, for 20-30 minutes to
check how your body reacts
. Later if necessary, you will be able to use all the functions
or any of their combinations together. However, we recommend not using PEMF on high
heat to avoid overstimulating.
17.
You should not feel any discomfort
— but if there is any, rest several days and restart
with the temperature, length, and frequency set to the lowest possible.
18.
Unplug your controller from the wall socket always when not in use. But do not
disconnect the controller from the vest more frequently than necessary
to avoid the
connection becoming loose.
Regular connector
for controller plug
In-line screw connector
between the vest and controller
OR
QUICK START GUIDE
THERMOGEM™ BIO-MAGNETIC AMETHYST TOURMALINE JADE LONG VEST
