Medicare Prolevo FootSafe Manual Download Page 9 | Manualshive

Page: 9 / 10

Medicare Prolevo FootSafe Manual Download Page 9

HeelSafe

(Uncovered)

Fitting Instructions

1. Remove the red cap from exhaust valve
2.

Remove the blue cap from inflation valve

3. Insert metal nozzle on hand pump into blue

inflation valve

4. Start to pump up device, after 50-60 seconds

you will hear/feel air start to exhaust via the red
valve. This means the optimal internal pressure of
20mmHg has been reached

5. Stop pumping and replace red cap on exhaust

valve. Replace the blue cap to the inflation valve

6. Fasten the two horizontal straps around the

mattress at the foot end of the bed via 2 piece
snap buckle pulling to adjust tension

7.

To deflate the device, remove the red and blue

caps and apply pressure to the device whilst

squeezing the blue inflation valve.

1. Fasten the two horizontal straps around the

mattress via 2 piece snap buckle pulling to adjust
tension

prolevo

Designed to be better

Inflatable

Pre-Inflated

Cleaning instructions are provided separately.

Fitting instructions are also available by scanning QR code on the product cover with a Smartphone App.

NB - Following assessment the clinician should use their judgement when supplying any product, ensuring

it is appropriately fitted and meets the patients’ needs as part of their pressure care management plan.

«
...
7
8
9
10
»

Summary of Contents for Prolevo FootSafe











Reviews:

No comments