SoleSafe
(Uncovered)
Fitting Instructions
1. Remove the red cap from exhaust valve
2.
Remove the blue cap from inflation valve
3. Insert metal nozzle on hand pump into blue
inflation valve
4. Start to pump up device, after 50-60 seconds
you will hear/feel air start to exhaust via the red
valve. This means the optimal internal pressure of
20mmHg has been reached
5. Stop pumping and replace red cap on exhaust
valve. Replace the blue cap to the inflation valve
6. Fasten the two horizontal straps around the bed
end via 2 piece snap buckle pulling to adjust
tension
7. Fasten the two vertical horizontal straps around
the bed end via 2 piece snap buckle pulling to
adjust tension
8.
To deflate the device, remove the red and blue
caps and apply pressure to the device whilst
squeezing the blue inflation valve.
1. Fasten the two horizontal straps around the bed
end via 2 piece snap buckle pulling to adjust
tension
2. Fasten the two vertical horizontal straps around
the bed end via 2 piece snap buckle pulling to
adjust tension
prolevo
Designed to be better
Inflatable
Pre-Inflated
Cleaning instructions are provided separately.
Fitting instructions are also available by scanning QR code on the product cover with a Smartphone App.
NB - Following assessment the clinician should use their judgement when supplying any product, ensuring
it is appropriately fitted and meets the patients’ needs as part of their pressure care management plan.