MVC Pro User Guide – English
MVCPro-UG01-EN-211004-OB
<
7
>
First installation / General preparations for safe operation and performance
Secure connection of your image source
In case, video peripherals are used within the medical video chain, it must be ensured that the image source is always connected to
the live viewing monitor via a primary, direct connection.
This primary, directly connected main monitor should always be used for live view.
The medical video chain that is connected through the MVC Pro SDI to HDMI convertor can only be used for recording and extra
viewing, e.g. educational purpose. It can’t be used for medical purpose.
If the output signal of the peripheral device is used for live view [3], it is necessary to switch the monitor immediately to the primary
signal [1] in case of failure or accidental disconnection of the peripheral device.
1] Primary connection camera to monitor (any signal type)
2] Quad-SDI connection to MVC Pro
3] Quad-SDI loop out to monitor (optional)
4] HDMI connection to recorder
Checks before you operate the device:
The operation of this device does not require special maintenance, calibration, special hygienic precautions or the use of
consumable components.
1. Turn on the unit from the back panel power switch.
2. Turn on your camera system(s) after MVC Pro has started its boot sequence.
Compatibility to other devices
The compatibility list for medical video sources can be found in
“Appendix A: MVC Pro Specifications”
MAIN MONITOR
CAMERA CCU
MVC Pro
