MVC Pro User Guide – English
MVCPro-UG01-EN-211004-OB
<
5
>
Residual Risks
Important Safety Instructions to avoid residual risks
1. Read all of these instructions.
2. Keep these instructions.
3. Heed all warnings in these instructions.
4. Follow all of these instructions.
5. Do not misuse this apparatus.
6. Make sure that your video source is directly connected to the monitor via primary safety wiring.
7. Clean the device regularly with a soft cloth moistened with surface disinfectant, alcohol or spirits. Follow the
disinfectant manufacturer‘s instructions!
IMPORTANT!
Make sure that no humidity enters the device. Do not use any cleaning agents, scouring agents or
solvents on this device.
8. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
9. Do not install near any heat source such as radiators, heat registers, stoves or other apparatus that produces heat.
10. Do not tamper with the polarized or grounding-type plug. A polarized plug has two types of blades with one being
wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or third
prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
11. Protect the power cord from being walked on or pinched especially near plugs, outlets, and the point where the cord
exits from the apparatus.
12. Only use attachments/accessories specified by the manufacturer.
13. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When
a cart is used, use caution when moving the cart/apparatus combination to prevent the cart from tipping over and to
avoid injury.
14. Unplug this apparatus during lightning storms or when unused for long periods of time.
15. Disconnection Method: Switch off AC power by the rocker switch on the rear panel, disconnect power cord.
16. Do not place vessels containing water or other liquids (such as vases, etc.) on top of the apparatus. Do not splash
water on top of the apparatus.
17. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as when a power supply cord or plug has been damaged, liquid has been spilled on the apparatus,
objects have fallen into the apparatus, and the apparatus has been exposed to rain or moisture, or does not operate
normally, or has been dropped.
18. Service Equipment by qualified personnel only, where qualified personnel refers to the person with proper education
or training assigned by the hospital, medical institution or authorized distributor.
19. Manufacturer will provide circuit diagrams, component part lists, descriptions calibration instructions to assist to
service personnel in parts repair or replacement.
Technical Support
For technical support and other questions, please visit medicapture.com or
call 888-922-7887 (toll free from within the USA) or 503-445-6935 (from outside the USA).
MediCapture
®
Inc.
EC REP: Obelis, SA
2250 Hickory Road, Suite 200
Bd. Général Wahis 53
Plymouth Meeting, PA 19462 USA
1030 Bruxelles, Belgique
