4134.A
8
Documentor
™
Resetting Instructions
TO CHANGE THE DATE:
1.
Plug Documentor™ into an electrical outlet.
2.
Press and hold blue RESET button located on the bottom of the Documentor
™
.
3.
While holding down the RESET button, press and hold the
•
right button on the front panel.
4.
While holding the
•
right button, release the RESET button.
5.
When
Prog
appears in the display, release the
•
right button,
Prog
finishes.
6.
Tap the
•
right button again. The display will show 0000 and the 1
st
digit will flash.
7.
Tap the
left button until the number 8 appears then Tap the
•
right button twice so the third 0 is
flashing.
8.
Tap the left button until the number 8 appears in the third position then Tap the
•
Right button.
9.
Tap the
left button until the number 8 appears in the fourth position. The display should read
8088 then Tap the
•
right button.
10.
When the display flashes all four digits, Tap the
•
right button
11.
The display flashes
P1(date)
.
12.
Tap the
•
right button, the small digits on the left, representing the year, will flash.
13.
Tap the
left button until the desired number appears then Tap the
•
right button. The digits
representing the month should flash.
14.
Tap the
left button until the desired number appears then Tap the
•
right button. The digits
representing the day should flash.
15.
Tap the
left button until the desired number appears then Tap the
•
right button.
16.
When the desired date is set Tap the
•
right button until the display flashes
P1 (date)
.
17.
Tap the blue RESET to return to the standard display.
TO CHANGE THE TIME:
18.
Follow steps 1-11.
19.
Tap the
left button, when the display flashes
P2 cloc
, Tap the
•
right button.
20.
The hour format will flash (12 or 24). If necessary, tap the
left button until 24 flashes. Tap the
•
right button
21.
The hour digits will flash; Tap the
left button until the desired setting is achieved. (the hour must
be set in military time 3:05 pm = 15:05) Tap the
•
right button
22.
The minutes digits will flash; Tap the
left button until the desired setting is achieved. Tap the
•
right button twice.
23.
The display will flash P2 Cloc, Press and release the blue RESET button.
