Medic Therapeutics 603-0082, User Manual

Page: 8 / 12

8
Step 9
Insert the pedals (#31) into the threaded
studs from where you previously removed
the horizontal tubes attached to the
middle of the front leg (# 5). Using the
washers (#32) and nuts (#13) fix them by
tightening them with the wrench. Finally,
place the straight rollers (#8) in the
horizontal tubes located on the upper part
of the pedals (#31).
Make sure to place each of the parts
mentioned in the previous step in the
correct order in which it is specified in
the drawing, using the dotted line for
reference.
Step 10
Using the PP nut (#30) and the PP
screw (# 29) attach the band piece (#
28) to the pedal piece (#31).
Step 11
Remove the nuts (#13) found on the
horizontal bolts of the middle part of the
rear leg (# 3) and place the 2 springs (#10)
from its lower end.