MS9400 HD FrEND User Guide
Chapter 6: Remote Control Protocol
36 Rev.
1.54
<clip>
-
a
media-clip
name.
<channel>
- a specific channel.
<channel list>
- a list of channels or ‘all’ for every channel.
A <channel list> parameter is mandatory for commands that act on specific channels, but will be absent for
generic player commands. Each section below will indicate whether a channel list is required. The channel list is
a “,” (comma) separated list of channels such as the following
1,2,3
- The command will apply to channels 1, 2 and 3.
A special symbol is also defined for all channels
ALL
- The command will apply to all channels
NOTE: Channels are numbered starting at 1.
Local Control
Use the hand-held remote or connect a USB computer keyboard directly to the MS9400.
Network Control
Connect the MS9400 to a show-control computer/system running ESCAN or other control application on a LAN.
Summary of Contents for MS9400 HD FrEND
Page 1: ...MS9400 HD FrEND User Guide...
