MS9400 HD FrEND User Guide
Chapter 3: Data Transfer
24 Rev.
1.54
Chapter 3: Data Transfer
Loading MPEG (.mpg) data files:
MPEG encoded HD or SD video clips (MPEG data) must be loaded on to the MS9400’s hard disk in order to be
played (sent to a display device).
Transfer all video files to the default folder in the MS9400 (a default test MPEG file is included with the
MS9400); this is the
/media
folder.
The user has two methods available for loading MPEG data into the MS9400:
•
ETHERNET port on the back panel – Connect the MS9400 to your LAN and transfer MPEG data
from your file storage system (or another computer) with any FTP application.
•
(Future) USB interface on the back panel – Connect the MS9400 to another computer or to a portable
drive and transfer files to the MS9400
Use the FTP application of your choice to up-load MPEG (.mpg) files stored on a “local computer” to the
MS9400. Follow the directions given with the specific application for transferring data between computers.
For the purpose of example we will describe two methods for file transfer:
1.
The DOS command window
2.
Internet Explorer
Perform these procedures with any Windows based PC.
The MS9400 “remote computer” and the computer containing video files for transfer (“local computer”), must be
connected to a network.
To Up-Load data with the DOS window:
1.
Select
Start/Run/
and type:
cmd
as shown; click OK
The following should appear:
Summary of Contents for MS9400 HD FrEND
Page 1: ...MS9400 HD FrEND User Guide...
