MediaScreen GmbH
SL Mobile LED 130
9
© MediaScreen GmbH
4.5. Rotating the screen
With the ScreenLifter you can rotate the screen 90° clockwise (seen from the front) and also
move it up and down in this position.
Before rotating the screen, pay attention to the height of the lower edge to ensure free ro-
tation without damaging the screen or the ScreenLifter base plate.
Before turning, make sure that the screen is secured to the frame with the two locking
screws.
To rotate, release the two clamping levers by one turn to the left and slowly rotate the
screen 90° to the stop. Then close the clamping levers again. The position of the levers can
be infinitely adjusted by pulling and turning. In this way, the desired alignment can be set
before and after clamping.
Do not forget to move the screen to the horizontal position before loading the ScreenLifter
into the transport case!
The position of the levers can be infinitely adjusted by pulling and turning. In this way, the
desired alignment can be set before and after clamping.
