MQ-1168 Evaluation Board Users Guide
MediaQ Incorporated
Board Revision 2
Revision A
4/18/02
Preliminary 10
Following are the steps required to download a software image to the platform flash memory.
1. Download the Flash Memory Programmer (JFlash), version 1.2 from
http://developer.intel.com/design/strong/swsup/
2. Unzip and read the readme.doc to setup the JFlash application. Run “jfsetup.bat.”
3. Note: Requires Intel Jtag cable. ( P/N 70-11131-12 REV 2.1 044)
4. Download “Ebootdwv5.nb0” from
ftp://ftp.mediaq.com/sw/mq11xx/windowsce/utils/jflash/
5. To Download image into the Neponset (SA1111) set dip switch 1, 2, 7 ON of the “SW2.”
6. To Download image into the Assabet (SA1110) set dip switch 1, 2, 7, &
8
ON of the “SW2.”
7. Once “Ebootdwv3.nb0” is flashed into the platform, select “Ethernet loader without launch” to
download image onto flash. Follow the steps required to download a software image to the
platform system memory.
8. Once image download is done, select “Program to flash” from the hyper terminal to copy image
into flash memory.
9. After program to flash is complete, perform cold boot.
