Medialon MAS Pro Dante User'S Reference Manual Download

Page: 16 / 88

Installation

Medialon MAS Pro Dante User Manual

p 16 of 88

M516-2 | 2020-05-19

•

[ERR]: reserved for future use.

•

[Dante Primary]: Dante port 1.

•

[Dante Secondary]: Dante port 2.

Rear Panel – Showmaster Go

Left to right:

•

[POWER]: Power Connector 12 - 19 Volts DC 4.7 A. See

Power section

for details.

•

[DisplayPort 1-4]: DisplayPort monitor outputs.

•

[GPIO]: General Purpose Input/Output connector (used by Medialon Manager).

•

[NIC 1]: Ethernet connector for Dante mapping.

•

[NIC 2]: Ethernet connector for external control, FTP, and Show Control.

•

[USB 1-2]: USB 2.0 ports available for general use or MAS Pro updates.

3.1.3

First Start

We recommend you connect Mouse, Keyboard and Monitor for the first use of MAS Pro. If you

plan to control the MAS Pro remotely, the Keyboard, Mouse and Display are not necessary after
the first setup.

Front Panel Controls

The figure below shows the front panel of MAS Pro.

•

[LED]: Four LEDs indicate MAS Pro status.

•

[LCD]: Status messages display on the 4-line LCD.

•

[KP]: Six-button Function Keypad.

Summary of Contents for MAS Pro Dante

























































































Search results

Summary of Contents for MAS Pro Dante

Reviews:

Related manuals for MAS Pro Dante

Brands by name

Popular brands

Medialon MAS Pro Dante, User'S Reference Manual

Search results

Summary of Contents for MAS Pro Dante

Reviews:

Related manuals for MAS Pro Dante

Brands by name

Popular brands