Medialon MAS Pro Dante User'S Reference Manual Download

Page: 58 / 88

References

Medialon MAS Pro Dante User Manual

p 58 of 88

M516-2 | 2020-05-19

References

7.1

Specifications

7.1.1

Rack Mount

WARNING – The unit is intended to be rack mounted as per applicable requirements so no
imbalance likely to occur and adequate clearance is to be provided so ambient temperature does

not exceed the limit. Please see

Mandatory Safety Rules and Precautions

section.

Installation

Note

: You need a #2 Phillips screwdriver for rack mount installation. Complete the following steps

to mount devices in a rack:

•

Remove the rack mount kit from the shipping carton. The kit contains two L-shaped mounting

brackets and four sink-head screws. The rack ears may be attached prior to shipping.

•

Using a Phillips screwdriver, attach the mounting brackets to the sides of the device using four

sink-head screws.

•

Using a Phillips screwdriver, mount the device in the rack using four rack-mounting screws.

7.1.2

MAS Pro Hardware

Hardware Specification

•

Storage

: SSD with 256 GB of storage

System

•

CPU

: Intel® Core i3-7101E processor

•

System Chipset

: Intel C236

•

Memory

: 4 GB DDR3 2666 MHz

•

H/W Status Monitor

: Monitoring temperatures, voltages, and cooling fan status. Auto

throttling control when CPU overheats

Summary of Contents for MAS Pro Dante

























































































Search results

Summary of Contents for MAS Pro Dante

Reviews:

Related manuals for MAS Pro Dante

Brands by name

Popular brands

Medialon MAS Pro Dante, User'S Reference Manual

Search results

Summary of Contents for MAS Pro Dante

Reviews:

Related manuals for MAS Pro Dante

Brands by name

Popular brands