Wall Box
Wall
Metal Bracket
Frame
MLC 62 MK
VOLUM
E
DISP
LA
Y
MU
TE
LA
PTO
P
OF
F
ON
PC
VID
EO
Figure 40.
Mounting the MLC 62 RS MK to an External Electrical Box
Mounting the MLC EU in a Raceway Using Spacers (Optional)
If you are experiencing difficulty with the MLC EU staying in place when installed in a cable
raceway, this may be due to a gap between the metal mounting bracket and the wall
frame.
When this gap exists, the tabs on the sides of the MLC do not reach the metal mounting
bracket and the MLC does not snap completely into the wall frame.
You can remedy this situation by installing a spacer (provided with the MLC EU) between
the metal mounting bracket and the rim of the junction box. This spacer is engraved with
the words “Optional Spacer” and “Place behind bracket” and has a slightly larger center
opening than the mounting bracket.
NOTE:
Do not attempt to use the spacer in place of the metal mounting bracket.
Because of its larger opening, the spacer will not hold the MLC EU in place in the
wall frame.
MLC 60 Series MediaLink Controllers • Features, Installation, and Operation
39