Spooky Blue V3 Laser Projektor
11
1. Introduction
1.1 General
The Spooky Blue V3 Laser Projector is a high quality lasersystem “Made in
Germany”. It’s unique technical features gives it a great advantage over
Asian low cost products. All Spooky projectors are equipped with a laser
safety circuit according to EN 60825, which cuts off the laserbeam in case
the scanning unit isn’t working correctly. Furthermore, with the integrated
interlock connector, you can easily attach the Spooky to an emergency stop
button or a key lock.
All Spooky projectors are equipped with the latest maintenance-free solid
state lasers, and closed loop deflection units, which enhance the accuracy
and detailness of the laser output. The images and animations, which are
stored in the integrated flash ROM, can be altered live using several
effects.
1.2 Unpacking
Open the box and remove the styrofoam inlays. Take out the projector
carefully. Included in the box you will find:
- projector
- power supply
- service plug
- manual
- declaration of CE conformity
- certificate of warranty
If the projector has been damaged on the transport, immediately inform the
freight forwarder and your dealer.
1.3 Technical Data
Output power laser
10G: max. 10mW
30G: max. 30mW
50G: max. 50mW
100G: max. 100mW
200G: max. 200mW
Wavelength
532nm green, 650nm red
Laser class
3b
Deflection angle scanner units
ca. 30°-35° optical
Scanning speed
4.000 – 12.000 points per second
Patterns (Gobos)
64
DMX channels
6
Temperature range
+10 - +35 °C
Humidity
max. 85%
Weight
ca. 2.5kg
Power supply
100 – 240VAC, 50-60Hz
Power consumption
max. 50VA
