CD-3706/P
Operator’s Guide
Document Revision: 030501.1
DVD-QuadraPRO LX Operator’s Guide
Document Revision: 070102
Page 19
2 = C L I C K D E T E C T I O N
S E L E C T O P T I O N
The factory setting for this function is “enabled”. When “disabled”, the
Click Detection
feature allows masters with small random errors to be
read to the hard drive. Caution should be taken when disabled, as
masters that would normally be rejected will be allowed to be read-in.
Undesirable results may occur.
3 = C O P Y P R O T E C T I O N
S E L E C T O P T I O N
The factory setting for this function is “disabled”. When “enabled”, the
Copy Protect
feature will write copy protection information into data
discs copied by the QuadraPRO.
5 = P R I N T E R
S E L E C T O P T I O N
Pressing the “5” key will give you the option to choose a printer or
disable the printer option. See the
Utilizing the Printer
Option
section of
this manual for more information.
•
Not used.
•
Press the “4” key on the keypad. The screen will now read:
S T A R T L O A D E R T E S T E R ?
[ S T O P ] = N O [ S T A R T ] = Y E S
When selected, the
Loader Test Mode
function allows you to manually
control the robotic functions of the system, for troubleshooting and
testing purposes.
[ 0 ] = C [ 1 ] = I [ 2 ] = A [ 3 ] = R
S E L E C T T E S T
•
The “0” key calibrates the picking arm
•
The “1” key will load a disc from the input spindle
•
The “2” key unloads the disc
•
The “3” key rejects the disc
•
Press the “Stop/No” key to exit
•
If you pressed the Stop/No key for Loader Tester you will be prompted
to align the printer.
