CD-3706/P
Operator’s Guide
Document Revision: 030501.1
CD-3000 Series Operator’s Guide
Document Revision: 100102
Page 30
S E L E C T C O P Y O R C O M P A R E
Note: If discs failed to copy properly they will be dropped in the
reject area in front of the drive bay. These discs should not be
used. To help you determine the nature of the problem, error
messages can be displayed by pressing the “9” key on the
keypad.
Multiple Images Enabled
To compare copied discs to a hard disk image that was previously created
with the
Multiple Images
feature “enabled”, the steps are as follows:
•
From the main operating screen depicted below:
S E L E C T C O P Y O R C O M P A R E
•
Load the copied discs to be compared into the input bin.
•
Press the “COMPARE” key on the keypad. The screen will now read:
C O M P A R E A G A I N S T H D ?
•
Press the “START/YES” key. The screen will now read:
I M A G E A = [ 1 ] B = [ 2 ] C = [ 3 ]
S E L E C T I M A G E
•
Select the image you would like to compare against by pressing 1, 2, 3,
or 4,
E N T E R Q U A N T I T Y :
Progress will be displayed on the screen during the operation:
C O M P A R I N G . . . .
G O O D : 0 B A D : 0 O F : 0
Upon successful completion, the compared disc(s) will be ejected.
The screen will now read:
