CD-3706/P
Operator’s Guide
Document Revision: 030501.1
CD-3000 Series Operator’s Guide
Document Revision: 100102
Page 27
Note:
If discs failed to copy properly they will be dropped in the
reject area in front of the drive bay. These discs should not be
used. To help you determine the nature of the problem, error
messages can be displayed by pressing the “9” key on the
keypad.
Multiple Images Enabled
To make copies from hard disk images that were previously created with
the
Multiple Images
feature “enabled”, the steps are as follows:
•
From the main operating screen depicted below:
S E L E C T C O P Y O R C O M P A R E
•
Load as many blank discs as are required into the input bin. Press the
“COPY” key on the keypad. The screen will now read:
F R O M H D ?
•
Press the “START/YES” key. The screen will now read:
I M A G E A = [ 1 ] B = [ 2 ] C = [ 3 ]
S E L E C T I M A G E
Along the top line of the display will scroll the available images,
identified by their number (1, 2, 3, and 4). The CD-3000 defaults to the
first image (1). For the purposes of this example, press the “1” key to
select this image, followed by the “START/YES” key. The screen will
now read:
E N T E R Q U A N T I T Y :
C O P Y I N G . . . .
G O O D : 0 B A D : 0 O F : 0
Progress will be displayed on the screen during the operation:
C O P Y O K , P R E S S S T A R T
G O O D : 0 B A D : 0 O F : 0
