2
| DMR User Manual 4.0
August 2009
Front Panel View
The front panel consists of an Optical Drive, the main
operation Keypad, two status LEDs, a small RESET
button, IR receiver, a power switch and a USB port.
The following is a brief description of each of these
components.
1 . Optical Drive
The DMR features an optical drive capable of recording
to DVD-R, DVD+R, and CD-R media.
2 . Front Keypad
The DMR has a front keypad that allows the user to
start and stop recording as well as navigate the on
screen menus without using the remote control. When
the REC button is pressed a menu will appear on the
display so you can determine which recording profile to
use. A monitor is required to use this feature.
DMR Front Panel
3 . LED Status
The LED indicators are used to describe system
states, actions and error conditions. The valid LED
states are described in the table below.
4 . RESET Button
To avoid inadvertent resetting of the system, the
RESET button is hidden behind a tiny hole in the
front panel and requires activation using a small
device such as a pin or paperclip. Pressing the
RESET button will reset the Administrator Password
and return the IP settings back to the default
network settings.
5 . IR Receiver
The IR Receiver is used with the included remote
control.
LED 1 (top)
RED/YELLOW/ ORANGE
LED 2 (bottom)
BLUE
Powering On
Orange
OFF
Ready
OFF
ON
Record/Stream
RED
ON
Indexing
RED Fast Blink
ON
Play/
OFF
Slow Blink
Error
YELLOW Fast Blink
OFF
Disk Burn
RED Slow Blink
ON
Mute
(not record)
OFF
Fast Blink
Mute (record)
RED
Fast Blink
1
2
3
4
5
6
7
