medemagroup Mini Crosser X1 Cabin, Quick Manual, Page: 15 / 20

Quick guide 1533-2005-Q
15 of 20
Version 1.0.0/2020
Medema Production A/S
Driving the Mini Crosser X1 Cabin
Getting in and out
It is important to learn a safe technique for getting in and out of the Mini
Crosser.
In general the following method should be followed:
• Make sure that the Mini Crosser X1 Cabin is off (switch turned to 0) when
getting in and out, otherwise the Mini Crosser could start if the accelerator was
touched inadvertently.
• Make sure that the brake is on. (Lever for disengaging motor in top position.)
• Put the steering column in vertical position.
• If necessary, raise the armrest.
Note! - Do NOT use the doors as support, when entering or getting out of
the vehicle.
IMPORTANT!
The Mini Crosser will turn itself
off automatically after it has been
stationary for 10 minutes even if
the key has been turned to driving
position.
To restart the vehicle, the key must
be turned to stop position (0) and
then to driving position (1).
Turn the Mini Crosser off, return the
steering column to upright position and
raise the armrest.