medemagroup Mini Crosser X1 Cabin, Quick Manual, Page: 10 / 20

Quick guide 1533-2005-Q
10 of 20
Version 1.0.0/2020
Medema Production A/S
Charging
The Mini Crosser should be charged while not in use. The charger supplied
from the factory switches to trickle charging (very low power consumption)
automatically when the batteries are fully charged. You can therefore leave
the charger connected until the Mini Crosser is next used. The charger
cannot overcharge the batteries.
The charger will flash until charging is complete. Then it will show a steady
light.
IMPORTANT!
The charger must not be placed on the seat during charging.
IMPORTANT!
Never use charging devices other than those supplied from the factory
without first contacting the dealer.
For further information see the User Manual.
NEUTRIK NC3MX charging plug Connect the charging plug to the 3-pin
socket on the steering column. The
charging socket is located under the
protective cover.