Service manual P9-0200-S
7 of 82
Version 2.0.2/2012
Medema Production A/S
Safe servicing
*
To avoid injuries to both the service engineer and the subsequent
user of the MC Concept, it is important to get to know the product
before servicing it.
*
Be particularly aware of the following:
*
The MC Concept MUST be turned off at the main switch. If
electrical components are being serviced, the positive terminal on
the battery MUST also be disconnected.
*
If the voltage needs to be measured in the course of
troubleshooting, take great care not to short-circuit anything.
*
Take great care not to short-circuit the battery terminals.
*
Be careful not to lift heavy parts such as the seat, battery and
motor gear incorrectly or drop them.
*
Make sure to raise one rear wheel off the ground so that the MC
Concept cannot drive off accidentally.
*
Use professionally maintained tools.
*
Where lock nuts are used, NEW ones MUST be fi tted when the
MC Concept is reassembled.
*
Take care to fi t new cable strips in the same way as the old ones.
Make sure that no cables can be trapped by moving parts or stick
out in such a way as to catch on things.
*
End every service by making sure that the product is roadworthy:
- Check that all the connectors are plugged in correctly.
- Check that all the mechanical parts are properly secured.
Summary of Contents for MC Concept 1103
Page 82: ...medemagroup...