User guide P9-0152-B
41 of 60
Version 3.0.0/2013
Medema Production A/S
Transporting by motor vehicle
The Mini Crosser must always be restrained and the handbrake
locked during transport.
Avoid lifting by the covers.
If you just need to lift the scooter slightly, take hold of the rear
bumper and the front bumper.
Important!
If you drop the scooter from a height of half a metre or more,
there is a risk that the gears in the transaxle will be destroyed.
Secure it in the vehicle with belts attached to the two eyes at
the front and two at the back. All the eyes are marked in yellow.
See the section entitled “Securing with belts”.
Push the disengagement lever down to
disengage (only handbrake works) and
push up to reactivate the motor (normal
driving now possible).
Disengagement lever
if the brake is somehow disengaged on a slope/hill, the Mini
Crosser will brake automatically when it reaches a certain
speed. There is an electric safety feature in the control system,
which works even if the battery is disconnected. This is also the
reason why the Mini Crosser cannot be towed at more than 5
km/h. See the section about towing.
Once the motor brake has been disengaged, the Mini
Crosser can only be braked with the hand brake.
