background image

User guide P9-0158-B

 25 of 48

Version 1.0.2/2012

Medema Production A/S

Batteries

The Mini Crosser uses sealed, maintenance-free GEL batteries 
(Exide 12 V/56 Ah or AGM 12 V/75 Ah). 

They do not generate gas and do not have to be topped up with 
 water. 

Charging

Please NOTE that the Mini Crosser can be equipped with 
several types of charger (ask your dealer for information on the 
various types).

IMPORTANT! Only ever use a charger designed for charging dry 
maintenance-free batteries. The max. charging current is  12 A. 

If charging is to take place outdoors, an enclosed charger 
without a fan should be chosen. 

The battery manufacturer recommends charging the batteries at 
temperatures b10° and +30°C in order to achieve the 
charging times specifi ed in “Technical data”. 

Charging will take longer at temperatures below +20°C. This is 
because the battery fi nds it more diffi cult chemically to absorb 
the current. 

Please NOTE that the capacity of the batteries will reduce 
over time and at low temperatures. In practice this means that 
vehicles with old batteries have a shorter driving distance than 
they had when the batteries were new.

Battery capacity at -10°C is about half the equivalent capacity at 
+20°C.

Summary of Contents for Mini Crosser M joy

















































Reviews: