User guide P9-0200-B
51 of 56
Version 2.0.3/2012
Medema Production A/S
Reconditioning
When preparing a MC Concept for a new user it is important to
check the following.
•
Transaxle - clean and check for leaks. Check bearings.
•
Tyre pressure (see technical data).
•
Condition of tyres (check for cracks and abnormal wear).
•
Cables (check that the cable insulation is undamaged and that no cables
are trapped, secure loose cables, check for signs of heat damage).
•
Control unit with joystick (check for moisture, function test).
•
Batteries (load test, check battery terminals and strap).
•
Charger (check that the charger is supplying the correct charge
voltage/current).
•
Fuses (function test).
•
Moving parts like leg supports, etc. (lubricate with acid-free oil).
•
Check wheels (pivot wheels, anti-tilt wheels and central wheels).
Clean and check for play.
•
Check the brakes/disengagement.
•
Bolts and washers (check bolts/washers everywhere on the
powered wheelchair. Check they are tightened properly and that
they are intact).
•
Hoist and tilt (check for breaks on the frame, hoist and tilt. Check
that there are no cracks or breaks - must not be welded).
•
Frame (check for cracks, remove any rust, repaint. Must not be welded).
•
Switches (check the switch controlling the speed reduction when
the hoist is activated).
•
Accessories (check the accessories, manual and electronic.
Replace any faulty fi nger screws or handles).
•
Test drive (test all functions at their maximum settings. Test drive
the powered wheelchair under maximum load).
•
The user instructions must be provided in a plastic folder on the
seat.
Summary of Contents for MC concept 1103
Page 56: ...medemagroup...
