1
00239
SEC-K
V4
Installation Instructions
The SEC-K is a gas pressure proving system with electric isolation, gas detection and ventilation interlock.
The system will perform a down stream integrity check ensuring gas tightness before use, close the gas
solenoid valve in the event of a high-level gas alarm, ventilation failure, low incoming gas pressure or if the
emergency stop/fire alarm is activated.
It can also monitor for carbon monoxide and dioxide out of hours should there be an issue from a solid fuel
appliance and raise an alarm or switch ventilation on via a relay.
It is designed for use primarily in Kitchens.
Before commencing installation please familiarise yourself to the equipment by reading the comprehensive
installation instructions. If in doubt then please call 0161 233 0600. Out of hours please call 07894 684080 or
07843 355163.
It is a statutory requirement that this safety system is installed and commissioned
to the satisfaction of the manufacturer.
A commissioning certificate must be issued to the end user along with instructions for the operation of the
equipment.
As the Manufacturer Medem UK should commission this safety system whereupon a commissioning report
will be forwarded to the installing agent who should provide a copy to the end user.
At the point of our commissioning an individual serial number will be attached to the system along with a 24
help line number. Photos and all relevant information for the installation will then be stored on the Medem
site database to be accessed in the event of a call on the 24 hour help line. The warranty period for the
panel and sender unit will then be extended to Ten years.
•
Gas Pressure proving.
•
Electrical Isolation. (optional)
•
Gas Detection .(up to 16 detectors with a power pack)
•
Fan interlock.
•
5 year warranty - 10 years when commissioned
SEC-K features
