C. Use screws(H) to tighten the two copper poles (I) onto the back of
Pedal component(A).Make sure the direction of the placement is
correct before screwing.
D
. Then reserved the Pedal component with two copper poles(I), and
use the hexagonal bolt(G) to tightly settled it with the piano body
according finished assembly in left leg component, fix the other side
of copper Pole onto the piano body (E). The assembly are finished.
Setup
12
0
5
25
75
95
100
aw_GRAND1000_Manual_G06_120912Part1
2012
9
12
12:35:46
