5.
Insert hard yellow adapter ends of tubing
into openings in breastshield connectors.
6.
Insert other ends of tubing into ports
on diaphragm cap. To remove tubing,
pull straight out of tubing ports; do not
wiggle tubing or pull at an angle.
7.
If single pumping:
insert port cap into
the unused port.
8.
If double pumping:
push port cap
onto post.
9.
Plug the metal fitting on end of
transformer or Battery Pack cord into
power jack on breastpump. Plug the
9 volt transformer into a standard
electrical outlet.
11
10
Assembly Instructions -
Pump In Style
®
Advanced Breastpumps
1. Securely attach breastshield to connector.
2. Snap membranes onto valves until
membranes lie completely flat.
*Be sure to separate membranes & valve
heads when cleaning and completely dry
prior to assembly.
3. Push assembled valves & membranes
onto breastshield connectors.
4. Screw bottles onto breastshield
connectors.
