EN
38
ENPRACTICAL RULES FOR GENERAL USE
The use principles presented in this section should be considered general
rules. For all programs, it is recommended that you read carefully the infor-
mation and advice on use presented in this manual.
Before a treatment proceed as follows:
a. Give the device a thorough visual check to see if there are any signs
of damage;
b. Remove all liquid containers from the vicinity of the device because it
has not been provided with protection against infi ltration by liquids;
c. Make sure that all the accessories required for stimulation (e.g. elec-
trodes, electrode cables, etc.) are within easy reach.
BEFORE USING MEDEL MYO-FIT 4
1. Connect two electrodes to each cable. Make sure you always insert
two electrodes to each electrode cable:
-1 electrode to the positive pole of the cable (red connector)
-1 electrode to the negative pole (black connector).
2. Apply electrodes to the body. For the correct positioning of elec-
trodes see the table on pages 46 and 50.
3. Connect cables to the MEDEL MYO-FIT 4. The electrode cables them-
selves are connected to the stimulator through sockets on the top of
the device.
The electrical impulses generated by the device are transmitted to the
muscles by self-adhesive electrodes. The choice of the size, the connection
and the correct positioning of the electrodes are essential factors for ensur-
ing effective and comfortable stimulation. So they require particular care.
100116_medel_Myo-fit 4_user manual_REV.00_14.09.2016.indd 38
22/09/2016 09:15:33
