34
EN
35
EN
7. TAKE A MEASUREMENT
1 Apply the cuff as described.
2 Press the START/STOP button.
All display symbols appear on the screen. The cuff starts to inflate automatically.
3 Inflation stop automatically and the measurement is started.
The heartbeat symbol flashes once a pulse is detected.
4 The blood pressure and pulse rate are displayed when the measurement
completed.
The cuff is deflated automatically,
and the results are stored in the
memory with date and time.
The symbol will be displayed if
arrhythmia is detected.
“kPa” display
“mmHg” display
“IHB” display
5 Press the START/STOP button to turn off the unit off.
The unit will automatically turn off after 2 minutes if you have forgotten to turn it off.
8. USE THE MEMORY FUNCTION
8.1. How to Use the Memory Function
•
The unit stores the blood pressure and pulse rate in the memory after com-
pleting a measurement every time. It can automatically store 60 sets of mea-
surement values. The oldest record is deleted to save the latest measurement
value when more than 60 set.
•
The unit also calculates an average reading based on the values of the latest 3
times measurement taken. You can get the average measurement value when
you press the memory button for the first time. Press the memory button for the
second time, you can get the latest measurement value, so on and so forth.
•
Press the left “MEM” button. The average value symbol will display on the
screen with the average reading.
8.2. The display method of memory values before turning off the unit when a
measurement completed.
8.3. The display method of memory values when the unit is powered off.
The present
measurement value
The Average
measurement value
The 1st latest
measurement value
The 59th latest
measurement value
The Average
measurement value
The 1st latest
measurement value
The 2nd latest
measurement value
The 60th latest
measurement value
man DISPLAY 23-44 EN 09.indd 34-35
12-05-2009 10:16:19