WIRELESS NETWORK SETUP (basic)
The Mede8er MED400X2S is only compatible with the Mede8er MED10WFB USB Wireless Dongle and the
MED20PCIE PCIe Card / antenna WiFi Kit (Other brands will not work)
Refer to User Instructions supplied with the optional Mede8er WiFi kit for detailed wireless
connection. setup.
Only use model MED10WFB WiFi Dongle as it is supplied together with the USB extension cable base.
WIRELESS NETWORK CONNECTION
Plug the MED10WFB into the USB extension base that
was supplied with your Mede8er. Plug the USB cable
into one of the USB host ports on the side of the
Mede8er. Extend the cable and try to place the base in
a position that is away from any metal object that could
effect the RF signal strength. The best placement for
the dongle will depend on your particular environment. In order to get the best placement you may need to
extend the length with an additional USB extension cable.
The operating distance or range of your wireless connection can vary significantly based on the physical
placement of the Router and the WiFi Dongle.
For best results, place your Router:
* Near the center of the area in which your Mede8er will operate,
* In an elevated location such as a high shelf,
* Away from potential sources of interference, such as PCs, microwaves, and cordless phones,
* With the Antenna screwed in tight and in the upright position,
* Away from large metal surfaces.
Page12
MED20PCIE PCIE
WIRELESS KIT
For user instructions for the installation of the Mede8er MED20PCIE WiFi Kit into the MED400X2S --
Pls check for the latest online user Guide on the Mede8er Website.
http://www.mede8er.com/mede8er_support.html
