Page11
WIRED NETWORK CONNECTION AND SETUP
The Mede8er MED400X2S can be connected to your local network by means of a RJ45 CAT5 cable. The
Mede8er is supplied standard with a UPnP facility, Samba Client and NFS that allows connection to your
local area network via a router or switch. You can share media files from your PC and stream media content
to the Mede8er and you can use the Mede8er as a Media Server to stream media content to other
Mede8er’s on your network.
Press the “setup” button on the Mede8er Remote or select “setup” tab on the home page. Select “Network”
option in the setup window and press “OK” to confirm. Network configuration allows for either automatic or
manual IP setup.
Follow the on-screen instructions to complete the network setup.
If you connect to a wired Ethernet network using DHCP, Mede8er automatically detects your network.
Alternately you may have to enter your IP address, subnet mask, router, and DNS addresses manually.
DHCP IP (AUTO)
Choose this option if you want your router to assign a dynamic IP address to Mede8er. This option is easy
to use and recommended for normal users.
FIX IP (MANUAL)
This option allows you to assign a static IP address to Mede8er. This option requires modifying network
settings of the Mede8er and is recommended for advanced users. To set a Static IP for your Mede8er, enter
the information IP Address, Subnet Mast and Gateway and DNS Server Address as relevant to your router
as in the screen below.
DHCP IP Auto
Fixed IP Manual
