R
L
R
CONNECTIONS - AUDIO AND VIDEO
Analogue Audio and Composite Video connection to TV.
Composite Video offers the most basic picture quality connection and should only be used if your TV does not
have a HDMI input. Use RCA analogue audio outputs in the absence of HDMI or Digital Audio inputs on your
TV or Home Theatre system. RCA analogue outputs will output a downmix from mutli-channel to stereo.
HDMI - RJ45 Network - Toslink Connection to a TV or Amplifier
For digital audio connection to your Home Theatre System use the HDMI connector. If your amplifier does not
have HDMI connector then you can use the TOSLINK Optical Digital output. The MED250X supports both
Passthrough and Downmix for both Dolby Digital and DTS signals.
AUDIO IN
L
R
VIDEO IN
HDMI
Optical Digital
Power up and Standby
Plug the AC/DC adapter into the mains outlet and plug the DC Jack into the DC IN at the rear of the
MED250X.
DO NOT USE ANY AC/DC ADAPTER AND ONLY USE THE ONE SUPPLIED
otherwise you
may cause damage to the unit. Press the On/Off button on the Mede8ers front panel and front facia LED will
turn on Blue. You can put your Mede8er into standby by pressing the On/Off button on the remote. When in
standby the front facia LED will turn Red.
Page5
Co-Axial Digital Audio Output
