INSTALLATION
Step 5:
Choose from the Chrome or Black Medallion faceplates included in the kit. Place the top edge
of the faceplate onto the top edge of the switch module and align the holes in the faceplate
with the buttons, then apply pressure the lower edge of the faceplate to snap it onto the lower
edge of the switch module. If you wish to change the faceplate, carefully use a Flathead to pry
between the space of the faceplate and the switch module.
Step 4:
Position the assembly into the fairing and secure it into position using the (4) ¼-20 screws that
held the stock radio in place
Step 6:
Connect the large black electrical plug disconnected from the rear of the stock radio and
connect it to the mating black connector on the Medallion harness.
5_
12
Summary of Contents for Bagger
Page 1: ...1 _ 12...