INSTALLATION
Step 2:
TIP: This is where having a second person to hold the outer fairing would be helpful.
On FLH fairings, loosen the (3) windscreen screws and only remove the two outer screws.
Leave the middle screw in place but loose. Remove the windscreen by wiggling gently and set
it aside. Hang onto the outer fairings while removing the middle screw and trim. Unplug the
headlamp connector [2a] and set the fairing aside.
On Road Glide FLT type fairings the windscreen doesn’t need to be removed to disassemble
the fairing, but it will be easier to reassemble the fairing without it. It can also prevent damaging
the black decal on the windscreen during reassembly. Begin by removing the turn signals from
each side of the fairing. Lift the outer fairing off the inner and disconnect the headlight [2a] and
set the outer fairing aside.
2a
Disconnect
Step 3:
Disconnect and remove the stock radio while remembering to keep the four screws.
Stock Radio
4_
12
Summary of Contents for Bagger
Page 1: ...1 _ 12...