MEDAIR 408 Series, Product Manual

Page: 11 / 16

ġġġġġġġġġġġġġġġġġਢ໢
ġġġࡸਢ໢ΙԩȂ໌Σਢ໢೩ۡ዁ԒȄᡗҰਢ໢ኵԅၰଢ଼ȂࡸŖŗቨ
ёਢ໢ȞωਢȟȂࡸ้ᚔυሎ෵ਢ໢ȞωਢȟȄӔࡸॳഀȂϸ඲
ϷមȂӔࡸŖŗቨёਢ໢ȞϷមȟȂࡸ้ᚔυሎ෵ਢ໢ȞϷមȟȄ
ӔࡸॳഀȂџϸ඲ڗਢមȄĶऌមฒӈդᐇհȂՌଢ଼ଝڗ࡟ᐠޑᄘ
Ȃ߳Ԇ೩ۡȄ
ġġġġġġġġġġ
ġ
ġġġġġġġġġġġġġġġġġ໠ᜰ
ġġġġࡸᗤϤऌȂ࡮ඈনኅ೩ۡ዁ԒȄԪਢӔ໠ᐠĻġॳഀ࢐ĴഀȂ໠ం
ŖŗЅ้ᚔυޑᄘȂਢមኵԅᡗҰııĻııȂႱघ೩ညᡗҰɆĮĮĮĮɇȂ
ᗻಖސᡗҰ։ਢᔮกኵ঄ȂଽᔆᓗႫႆᘮঘޟಣॎஈ՗ਢ໢ڷྣ
ᕆ࡙ᡗҰ։ਢၥਟȄ
TIMER
Press one time, enter into the mode of setting time. The
display shows time number twinkling. Then press UV to increase
hour, Plasmas Ion to reduce hour. Continue to press SPEED to
switch into minute setting, also press UV to increase, Plasmas
Ion to reduce. After setting, press SPEED to store the order. If
no operation till 5 seconds, system back to the status of standby.
POWER
Press till 5 seconds, restore to factory settings. At this
moment to turn on the machine:
SPEED at third shift;
UV function is available;
Plasma Ion function is available
；
Time Number Bar shows “00:00”;
PRE-SET shows “----”;
PM Sensor is testing the air environment;
TEMPERATURE & HUMIDITY Sensor is working.
Page.19 Page.20