Med-Mizer FlexTilt FT24 User Manual Download Page 3

 

 

FlexTilt FT16-FT24 User Manual 

 

Revision 06

 

MAN-FlexTilt REV06 

FlexTilt-FT20-FT24 USER MANUAL 

Page 3 of 13 

Overview 

Introduction 

This manual provides instructions for use of the FlexTilt. Do not operate the chair without first 
reading and understanding the warnings and cautions provided herein. 

NOTICE: The information in this document is subject to change without notice. 

Intended Use 

The FlexTilt geriatric chair is intended to provide means for a single occupant to recline and sit, 
and to assist the occupant in moving between reclining, sitting and standing positions.  

The chair is intended for use in U.S. and Canada long and short-term care facilities, and homes. 

The chair is intended to support a safe working load of 350 lbs. (evenly distributed), which 
includes the weight of the occupant, clothing and accessories. 

The chair is intended for operation by adult users who have read and understand this User 
Manual. 

The chair is intended for use in environments where it will not get wet, and where the ground is 
stable and level. 

 

Safety Information 

 

This symbol identifies a 

WARNING

 or 

CAUTION

 

WARNING

 represents potentially dangerous situations that can lead to serious physical 

injury or death. 

 

CAUTION

 represents potentially dangerous situations that can lead to minor physical 

injury. 

 

General Use Safety 

 

WARNING

 Chair must be used as specified under the “Intended Use” heading. Use of 

the chair outside of the specified conditions may result in personal injury or equipment 
damage. 

 

 

Summary of Contents for FlexTilt FT24














Reviews: