mectron starlight s +, Installation Manual

Page: 28 / 32

22
starlight s +
8.1.4 Specifications of the tests for the Immunity of the Accessible
Parts of the Casing to the Wireless RF Communications Device
the device is designed to operate in an electromagnetic environment in which radiated rF
disturbances are under control. the customer or the user of the device can help prevent
electromagnetic interference by ensuring a minimum distance between the mobile and portable
RF (transmitters) communication devices and the device, as recommended, in relation to the
maximum output power of radiocommunications equipment.
Test
Freq.
(MHz)
Band
a)
(MHz)
Service
a)
Modulation
b)
Max
power
(W)
Distance
(m)
Immunity
test level
(V/m)
385 380 - 390 tEtra 400
Pulse
modulation
b)
18 hz
1.8 0.3 27
450 430 - 470
GMRS 460
FRS 460
FM
c)
± 5 kHz
deviation
1 khz sine
2 0.3 28
710
704 - 787
LTE band 13,
17
Pulse
modulation
b)
217 hz
0.2 0.3 9 745
780
810
800 - 960
gsM 800/900
tEtra 800
iDEN 820
CDMA 850
Band LTE 5
Pulse
modulation
b)
18 hz
2 0.3 28
870
930
1720
1700 - 1990
gsM 1800
CDMa 1900
gsM 1900
DECt
LTE Band 1, 3,
4, 25
UMts
Pulse
modulation
b)
217 hz
2 0.3 28
1845
1970
2450 2400 - 2750
Bluetooth
WlaN
802.11 b/g/n
RFID 2450
Band ltE 7
Pulse
modulation
b)
217 hz
2 0.3 28
5420
5100 - 5800
WlaN
802.11 a/n
Pulse
modulation
b)
217 hz
0.2 0.3 9 5500
5785
a) For some services, only the uplink frequencies are included.
b) The carrier shall be modulated using a 50 % duty cycle square wave signal.
c) As an alternative to FM modulation, 50 % pulse modulation at 18 Hz may be used because while it does not represent
actual modulation, it would be worst case.