Mecmesin Vortex-dV, Operating Manual

Page: 26 / 38

Vortex -dV Operating Manual
Mecmesin
 26
Half Cycle
A half-cycle test is to an angular displacement relative to tared zero. A cycle starts when
the crosshead is at the first displacement position and ends back at the second position.
Setting Options
Cycle Count
0-8000
Clockwise Speed 0-30rev/min
Anticlockwise Speed 0-30rev/min
Clockwise Angle
A positive value is clockwise from tared zero and a negative value is
below
Anticlockwise Angle
A positive value is clockwise from tared zero and a negative value is
below
Start Direction Choose whether the test direction is clockwise or anticlockwise
Move to Start Select if the test moves to the start position first
Example

Clockwise Angle:
+180
°

Anticlockwise Angle
-90
°

Initial stroke:
Clockwise

Move to Start: Yes
Unless already at -90
°
from tared zero, the spindle will travel to that point and then move
to +180
°
from tared zero, and stop.