page 5
Pressing the red
Emergency Stop
button will, at any time,
cut power to the motor and stop the lower fixture rotating.
‘Emergency Stop’ is displayed on the screen.
To disengage the stop button turn clockwise and then
release.
It is advisable to check and become familiar with the
operation of the Emergency Stop once the system is
connected to the appropriate mains supply.
Rotating the Lower Fixture
To rotate the lower mounting table, or any other base
fixture that is attached to the drive shaft adaptor (see (E),
page 10), press ‘
Clockwise
’ or ‘
Counter-clockwise
’ with the
direction control key and hold in this position. The base
fixture will continue to rotate until one of the following
occurs:
a) The direction control key is released
b) The power is disconnected
c) A pre-set break/limit is reached
(see ‘Measuring & Displaying Torque’, page 8)
Pressing the
clockwise direction
key will drive the turntable
clockwise at the speed indicated by the front panel display.
Pressing the
counter-clockwise direction
key will drive the
turntable counter-clockwise at the speed indicated by the
front panel display. While the turntable is moving, the
display will show the current speed set with the other
direction hidden.
The turntable will continue to move in the appropriate
direction all the time the
Direction
key is pressed.
Releasing the
Direction
key will stop turntable movement.
The current speed the turntable is travelling at may be
changed using the
Speed
controller. When the stand stops
the speed will revert to the pre-set speed.
Emergency Stop
Direction
