Introduction
Thank you for choosing this Mecmesin MultiTest-
d
, force testing system. With correct use it
will provide many years of accurate and reliable service.
The MultiTest-
d
has been specifically designed as an easy-to-use tension and compression
testing solution for production areas, where throughput, productivity and minimal training are
vital and where the use of a computer is not always suitable.
The MultiTest
-d
Scope
This Start-up Manual is suitable for use with the Mecmesin MultiTest 0.5-
d
, 1-
d
, 2.5-
d
and
their derivatives.
(The front cover illustrates a MultiTest 2.5-d)
Before Use
Unpacking the stand
When you first receive the MultiTest-
d
, please check that there is no obvious damage to the
packaging. Appendix 2 lists items which should be included with your test stand. Please
contact Mecmesin or your authorised distributor immediately if any items are missing or there
are signs that the packaging or the test stand itself has been damaged. Do not use the test stand
until you have done so.
We strongly recommend that the packaging is kept as this can be useful if the unit needs to be
returned for calibration. Appendix 3 lists instructions for repacking the test stand.
Important: It is essential that you familiarise yourself with the contents of this
Start-up Manual before attempting to operate your MultiTest-
d
Test System.
Safe Operation of the MultiTest-
d
Before you use the MultiTest-
d
, you must read the guidance contained in the section ‘A Guide
to the Safe Use of Mains Powered Test Frames’ on the safe use of this product. Test systems
delivered into the European Union (EU) will have a copy of this section translated into a
language appropriate for your country supplied by your Mecmesin distributor.
Failure to adhere to the guidelines for safe use given in this operating manual may
result in irreparable damage to the test stand and personal injury to the operator.
page 2
