Mech Marvels MM212FTT Instruction Manual Download Page 7

NEED HELP? 1-800-832-2966

 

 

Operator Responsibilities 

 

 

Carefully read and follow these safety instructions. Failure to do so can result in serious injury. 

 

Know your product. Read and understand this manual before use. Compare the illustrations to unit. Learn location and 

function of all controls. 

 

Thoroughly understanding the unit before use will result in the best performance and safety. 

 

Keep area of operation clear of all bystanders, particularly small children and pets. 

 

Only allow responsible individuals, who are familiar with the instructions, to operate the tiller. 

 

Do not operate the tiller while under the influence of alcohol, drugs, or other medication which can cause drowsiness or 

affect your ability to operate this machine safely. 

 

Do not use this machine if you are mentally or physically unable to operate the machine safely. 

 

Never operate the tiller without good visibility or light. 

 

Follow all instructions when assembling the unit. If the unit was purchased in assembled condition, the operator must 

check the unit carefully to make sure it was assembled according the instructions in the manual before use. 

 

Regularly inspect the machine. Make sure parts are not bent, damaged, or loose. 

 

Use this equipment for its intended purpose only. 

 

Operate the unit only with guards, shields, and other safety items in place and working correctly. 

 

Service the unit only with authorized or approved replacement parts. 

 

Complete all unit maintenance and adjustments according to the instructions in this manual  

 

Fuel Safety 

 

 

Gasoline is extremely flammable, and gasoline vapors can explode if ignited. Handle with care. 

 

Use only approved containers for transport and storage. 

 

Check fuel supply before each use, allowing space for expansion when filling, as the heat of the engine and/or sun can 

cause fuel to expand. 

 

Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors. 

 

Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. 

 

Do not smoke while refueling. 

 

Never fill gasoline containers or the tiller fuel tank inside of a vehicle or in a truck bed. Accidental electrical static discharge 

can ignite fuel vapors which could result in serious injury or death. 

 

After refueling, replace fuel tank cap securely and wipe up spilled fuel. 

 

Never store fuel, or a tiller with fuel in the tank, inside a building where fumes may reach a source of ignition.  Ignition 

sources that may be present are items such as water heaters, space heaters, and clothes dryers. 

 

To reduce the risk of fire, keep the tiller free of grass, leaves, or other debris build-up. 

 

Allow the engine to cool completely before storing in any enclosure. 

 

Always refer to the storage instructions for important details if the tiller is to be stored for an extended period of time. 

Summary of Contents for MM212FTT





























Reviews: