NEED HELP? 1-800-832-2966
23
To Maximize Product Life
Engine:
➢
Check oil level before each use and after every 8 hours of operation.
➢
Change oil after first 5-8 hours of operation. Change oil while engine is warm. Refill with new 10W-
30 oil, API rating SG, SH, SJ or better.
➢
Replace spark plug yearly or every 100 hours of operation.
➢
Service air cleaner regularly.
➢
Keep engine and machine parts clean.
➢
Check engine and equipment often for loose nuts and bolts, keep these items tightened.
Transmission:
➢
The tiller transmission is shipped from factory with the proper amount of grease in the assembly. If
service is needed, the tiller transmission holds 130
±10g.
➢
A high-quality lithium-based grease is used (Lithium No 1.).
Axle Shaft:
➢
Tip the tiller back and secure it to allow access to the axle shaft.
➢
Remove any accumulated material such as vegetation, string, wire, or other materials. Pay extra
attention to the area around the axle at the transmission housing. Any material/debris in this area
will damage the seals and shorten the life of the transmission.
➢
It may be easier to clear debris by removing the tines.
➢
Lower the tiller to the normal operating position.
Tines:
➢
Always check tine condition prior to use.
➢
Damaged or obstructed tines will result in poor tilling performance.
➢
Check tines for obstructions and clear all debris.
➢
If tines are bent, broken, or excessively worn, replace them as a set.
➢
Using the tiller with damaged tines will result in accelerated wear of the machine.
Engine should always be off with the spark plug wire disconnected for safety prior to beginning any repair or
maintenance on the machine.