NEED HELP:1-800-832-2966
15
Pre-Operation Check List
Step 1 Check that the gasoline supply is in good condition, or check that the LPG inlet connection is secured tightly and not leaking. Turn the fuel valve
to “on” for gasoline, or open the valve for LPG.
Step 2 Make certain the CHOKE VALVE is at CHOKE (CLOSED) position. The generator may be hard to start if CHOKE VALVE is at the
RUN (OPEN) position.
Step 3 Ensure engine oil is full.
Step 4 Make sure GROUND TERMINAL is properly grounded.
Step 5 Check AC OUTPUTS and ensure no load is connected.
Disconnect all electrical loads from the generator set before starting the engine. The generator may be hard to start if a lo ad is connected.
Step 6 Check DC OUTPUT and ensure no load is connected.
Closed
Open
ON
OFF
