MECALAC AHLMANN Mecadiag, Manual, Page: 13 / 26

g
B
13
In de case of failure of the update process
of embarked tool because of a current cut of
the tool MecaDiag Pocket when the display
was black with « loader », the standard
update of the tool may not work.
In this very particular case, it is possible
to use the control from the menu
« MecaDiagPC/ update the firmware of
every MecaDiag Pocket » (« MecaDiagPC
/ Mettre à jour le firmware de tous les
MecaDiag Pocket ») which will apply to the
MecaDiag Pocket plugged to the PC, or to
the whole MecaDiag Pockets if several tools
are simultaneously connected to the PC
which is possible.
The small green balls show that an update
is available on the PC.
There is a green ball for the MecadiagPC
program and a green ball for the embarked
MecaDiag Pocket program.
NOTE :
On the picture below there is only on green
ball showed.
At the end of the update process if it has
succeeded :
The dialog box hereunder will appear, and
a click on « OK » will allow to close it.