Instruction Manual
TRITASK-300F Series
Version: May 2020
- 3 -
Mainland Energy Conversion Ltd.
Tel: +
852 2366 9610
E-mail:
www.mec-powersolutions.com
General Errors Description
Solutions
No LED lighting or blinking after connecting to the mains
•
Check if the charger is connected to mains supply properly
•
Check if there are any problems with the mains supply or mains cable
•
Check if the charger is switched on
•
Red Mains-LED is on, charger is connected to the battery,
but the charging process seems not working
•
Check the connection to battery and if the polarity has been correctly
connected
•
Check if the battery is damaged or has been deeply discharged
Advice for Disposal
It is prohibited to dispose the charger with household or residual waste removal (WEEE-Richtlinie 2012/19/EU und
EAG-VO). The charger must be disposed at designated disposal points. For the protection of our environment, please
check at your communal adminstrative agency of your nearest disposal point.
The charger conforms to the RoHS-directive EU 2015/863, for the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Disclaimer of Warranty
The warranty period (see our General Terms and Conditions) starts with the charger being dispatched by the manufacturer. The Company accepts
liability by guaranteeing to working hours and spare parts only.
For damages caused by non-observance of the operating instructions, inappropriate start up or handling as well as dismantling, reconstructions or
modifications of the charger, the warranty claim expires and the Company assumes no liability for consequential damages to any properties or persons
in connection with or arising from the purchase and use of the charger.
We reserves the rights to configure the charger as per actual needs and the manual may not reflect the most updated conditions of the product at all
times. Please contact us should you need any technological support.
Errors and Troubleshooting