Page 14
93808 – October 2014
6092RT
Operating Instructions
Operating Instructions
DO NOT operate this machine until you have read and understood the Safety section of this manual, have performed the Jobsite
Inspection, Pre-Start Inspection and Routine Maintenance, and have completed all the test operations detailed in the Operating
Instructions section.
This section provides instructions for each function of machine operation. Follow all safety rules and instructions.
This machine may be operated by trained and authorized personnel only. If multiple operators use this machine, all must be qualified
and authorized to use it. New operators must perform a Pre-Start Inspection and Functions Test prior to operating the machine.
Operators must comply with employer, job site and governmental rules regarding the use of personal protective equipment – see
Fall
Protection
on page 3.
Prestart
• Perform
Prestart Inspection
(see
page 27).
• Check base control Emergency Stop Switch – turn clockwise to reset.
• Check platform control Emergency Stop Switch – turn clockwise to reset.
• Check Battery Disconnect Switch in Control Module next to Base Controls.
Must be in ON position.
ART_2506 R2
ART_2507 R2
ART_2356
