Page 8
69 Seres - Operator’s Manual
February 2019
Secton 3 - Safety Rules and Hazards
Close the entry gate before operating.
Do not operate the machine unless the guard rails are properly installed and the entry is secured for
operation.
Do not enter or exit the platform unless the machine is in the stowed position.
Collision Hazards
Be aware of limited sight distance and blind spots when driving or operating.
Be aware of extended platform position(s) when moving the machine.
Check the work area for overhead obstructions or other
possible hazards.
Be aware of crushing hazards when grasping the platform
guard rail.
Operators must comply with employer, job site and governmental rules regarding use of personal
protective equipment.
Observe and use color-coded direction arrows on the platform controls for drive and steer functions.
Do not operate a machine in the path of any crane or moving overhead machinery unless the controls
of the crane have been locked out and/or precautions have been taken to prevent any potential
collision.
No stunt driving or horseplay while operating a machine.
Do not lower the platform unless the area below is clear of
personnel and obstructions.
Limit travel speed according to the condition of the ground
surface, congestion, slope, location of personnel, and any other
factors which may cause collision.
Component Damage Hazards
Do not use any battery or charger greater than the battery related voltage to charge the battery.
Do not use the machine as a ground for welding.
Explosion and Fire Hazards
